Welcome!

Web 2.0 Authors: Pat Romanski, Shelly Palmer, Jnan Dash, David Weinberger, Roger Strukhoff

News Feed Item

Efficient Power Conversion (EPC) Introduces Plug and Play 97% Efficient Half-Bridge Converter DrGaNPLUS Evaluation Board Featuring Gallium Nitride Transistors

Providing an easy-to-use way for power systems designers to evaluate the exceptional performance of gallium nitride transistors, Efficient Power Conversion Corporation (EPC) introduces DrGaNPLUS evaluation boards. These boards are proof-of-concept designs that integrate all necessary components of a half-bridge circuit into a single, extremely small PCB-based module that can be readily mounted to demonstrate the excellent performance of a GaN transistor power conversion solution.

The first DrGaNPLUS board, the EPC9202, a 100 V, 10 A half-bridge power converter is a “plug and play” evaluation board that designers can use to quickly and easily evaluate the high performance gained with gallium nitride power transistors. As an example, this board reaches 97% peak efficiency with Vin = 48 V and Vout = 12 V, a common power conversion for telecom applications.

The EPC9202 can be driven by a single PWM input and features two EPC2001 eGaN FETs, the Texas Instrument’s LM5113 driver, and high frequency input capacitors. This DrGaNPLUS board is small, only a little over 9 mm on a side, and can mount directly onto a printed circuit board. It has been designed with an optimal layout to minimize the debilitating effects of common source and high frequency power commutation loop inductances.

Features   Benefits
  • 97% peak efficiency (VIN =48 V to VOUT = 12 V
 
  • Increased power density
  • All necessary components and optimal layout techniques
 
  • Easy evaluation for faster time to market
  • Easy mount PC board with single PWM input
 
  • Plug-and-Play assembly
  • High frequency eGaN FETs
 
  • Lower system size and cost

“We are excited to make available the EPC9202 eGaN FET evaluation board, the first board in our DrGaNPLUS series. In addition to improved performance, lower cost and reliability, ease-of-use is a critical factor in the adoption of a new technology. With the introduction of DrGaNPLUS evaluation boards, power conversion systems design engineers now have a quick and easy way of assessing the exceptional benefits of incorporating gallium nitride transistors into their power systems circuits,” noted Alex Lidow, CEO and co-founder of EPC.

A Quick Start Guide, containing set up procedures, circuit diagram, performance curves, and a bill of material is included with the EPC9202 demo board for reference and ease of use is provided on-line.

EPC9202 demo boards are priced at $45.00 each and are available for immediate delivery from Digi-Key at http://www.digikey.com/Suppliers/us/Efficient-Power-Conversion.page?lang=en

Design Information and Support for eGaN FETs:

About EPC

EPC is the leader in enhancement mode gallium nitride based power management devices. EPC was the first to introduce enhancement-mode gallium-nitride-on-silicon (eGaN) FETs as power MOSFET replacements in applications such as DC-DC converters, wireless power transfer, envelope tracking, RF transmission, solar micro inverters, remote sensing technology (LiDAR), and class-D audio amplifiers with device performance many times greater than the best silicon power MOSFETs.

Visit our web site: www.epc-co.com

Sign-up to receive EPC updates via email: http://bit.ly/EPCupdates or text "EPC" to 22828

Follow EPC on Twitter at http://twitter.com/#!/EPC_CORP

Like EPC on Facebook at http://www.facebook.com/EPC.Corporation

eGaN is a registered trademark of Efficient Power Conversion Corporation, Inc.

More Stories By Business Wire

Copyright © 2009 Business Wire. All rights reserved. Republication or redistribution of Business Wire content is expressly prohibited without the prior written consent of Business Wire. Business Wire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.