|By PR Newswire||
|February 13, 2013 08:01 AM EST||
PACIFIC MISSILE RANGE FACILITY, KAUAI, Hawaii, Feb. 13, 2013 /PRNewswire/ -- A Raytheon Company (NYSE: RTN) Standard Missile-3 Block IA fired from the USS Lake Erie destroyed a medium-range ballistic missile (MRBM) target using tracking data from a remote Raytheon sensor payload on the Space Tracking and Surveillance System-Demonstrator (STSS-D) satellites.
"This test further expands our confidence in the SM-3's ability to engage targets using remote, netted sensor targeting," said Wes Kremer, Raytheon Missile Systems' vice president of Air and Missile Defense Systems. "Launching on remote is important because it extends the engagement range of the missile, allowing ships with the SM-3 to expand the battlespace and eliminate threats sooner."
The MRBM target was launched from the Pacific Missile Range Facility. As it rose above the horizon, the target was acquired and tracked by STSS-D. Threat data was then relayed through the Command, Control, Battle Management and Communications (C2BMC) system to the ship. The ship's crew fired the SM-3 based on STSS track data and before the ship's radar acquired the target.
"STSS-D's unique vantage point in space allows the sensor payload to see the threat early in its trajectory and provide launch quality data sooner than nearly any other option," said Bill Hart, vice president of Space Systems for Raytheon's Space and Airborne Systems business. "We can give our naval warfighters extra time to analyze and respond, by providing target data before the ship can track the threat. That's a tremendous advantage."
The test proves the "launch on remote" concept, which was first demonstrated during testing in April 2011 when a U.S. Navy destroyer used track data provided by a Raytheon-made AN/TPY-2 radar deployed on Wake Island to engage and destroy an intermediate-range ballistic missile target using an SM-3 Block IA.
About the Standard Missile-3
The SM-3 guided missile is designed to destroy incoming short-, medium-, and intermediate-range ballistic missile threats by colliding with them in space, a concept sometimes described as "hitting a bullet with a bullet." The missile does not contain an explosive warhead, but instead destroys the threats using sheer impact, equivalent to a 10-ton truck traveling at 600 mph.
- More than 135 SM-3s have been delivered to U.S. and Japanese navies ahead of schedule and under cost.
- Raytheon is on track to deliver the next-generation SM-3 Block IB guided missile in 2014.
- SM-3 Block IB guided missile will be deployed in both afloat and ashore weapons systems.
- The test marks the 22nd successful intercept for the SM-3 program.
About the Space Tracking and Surveillance System-Demonstrator Satellites
STSS-D is a research and development capability for the Ballistic Missile Defense System that can detect and track ballistic missiles and other cold objects in space. Raytheon sensors used on the payloads were developed under contract to Northrop Grumman, prime contractor for the STSS-D program.
- STSS-D consists of two satellites carrying sensor payloads in a low-Earth orbit.
- The satellites demonstrate the value of space-based sensors to missile defense.
- The STSS-D payloads are able to detect infrared and visible light.
Raytheon Company, with 2012 sales of $24 billion and 68,000 employees worldwide, is a technology and innovation leader specializing in defense, homeland security and other government markets throughout the world. With a history of innovation spanning 91 years, Raytheon provides state-of-the-art electronics, mission systems integration and other capabilities in the areas of sensing; effects; and command, control, communications and intelligence systems; as well as a broad range of mission support services. Raytheon is headquartered in Waltham, Mass. For more about Raytheon, visit us at www.raytheon.com and follow us on Twitter @raytheon.
SOURCE Raytheon Company
trust and privacy in their ecosystem. Assurance and protection of device identity, secure data encryption and authentication are the key security challenges organizations are trying to address when integrating IoT devices. This holds true for IoT applications in a wide range of industries, for example, healthcare, consumer devices, and manufacturing. In his session at @ThingsExpo, Lancen LaChance, vice president of product management, IoT solutions at GlobalSign, will teach IoT developers how t...
May. 6, 2016 12:00 PM EDT Reads: 812
When it comes to IoT in the enterprise, namely the commercial building and hospitality markets, a benefit not getting the attention it deserves is energy efficiency, and IoT's direct impact on a cleaner, greener environment when installed in smart buildings. Until now clean technology was offered piecemeal and led with point solutions that require significant systems integration to orchestrate and deploy. There didn't exist a 'top down' approach that can manage and monitor the way a Smart Buildi...
May. 6, 2016 10:53 AM EDT Reads: 154
So, you bought into the current machine learning craze and went on to collect millions/billions of records from this promising new data source. Now, what do you do with them? Too often, the abundance of data quickly turns into an abundance of problems. How do you extract that "magic essence" from your data without falling into the common pitfalls? In her session at @ThingsExpo, Natalia Ponomareva, Software Engineer at Google, will provide tips on how to be successful in large scale machine lear...
May. 6, 2016 10:30 AM EDT Reads: 1,591
SYS-CON Events announced today that Peak 10, Inc., a national IT infrastructure and cloud services provider, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Peak 10 provides reliable, tailored data center and network services, cloud and managed services. Its solutions are designed to scale and adapt to customers’ changing business needs, enabling them to lower costs, improve performance and focus inter...
May. 6, 2016 10:00 AM EDT Reads: 1,513
Digital payments using wearable devices such as smart watches, fitness trackers, and payment wristbands are an increasing area of focus for industry participants, and consumer acceptance from early trials and deployments has encouraged some of the biggest names in technology and banking to continue their push to drive growth in this nascent market. Wearable payment systems may utilize near field communication (NFC), radio frequency identification (RFID), or quick response (QR) codes and barcodes...
May. 6, 2016 10:00 AM EDT Reads: 1,098
You think you know what’s in your data. But do you? Most organizations are now aware of the business intelligence represented by their data. Data science stands to take this to a level you never thought of – literally. The techniques of data science, when used with the capabilities of Big Data technologies, can make connections you had not yet imagined, helping you discover new insights and ask new questions of your data. In his session at @ThingsExpo, Sarbjit Sarkaria, data science team lead ...
May. 6, 2016 10:00 AM EDT Reads: 1,312
SYS-CON Events announced today that Ericsson has been named “Gold Sponsor” of SYS-CON's @ThingsExpo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. Ericsson is a world leader in the rapidly changing environment of communications technology – providing equipment, software and services to enable transformation through mobility. Some 40 percent of global mobile traffic runs through networks we have supplied. More than 1 billion subscribers around the world re...
May. 6, 2016 09:15 AM EDT Reads: 1,433
We're entering the post-smartphone era, where wearable gadgets from watches and fitness bands to glasses and health aids will power the next technological revolution. With mass adoption of wearable devices comes a new data ecosystem that must be protected. Wearables open new pathways that facilitate the tracking, sharing and storing of consumers’ personal health, location and daily activity data. Consumers have some idea of the data these devices capture, but most don’t realize how revealing and...
May. 6, 2016 09:00 AM EDT Reads: 812
The demand for organizations to expand their infrastructure to multiple IT environments like the cloud, on-premise, mobile, bring your own device (BYOD) and the Internet of Things (IoT) continues to grow. As this hybrid infrastructure increases, the challenge to monitor the security of these systems increases in volume and complexity. In his session at 18th Cloud Expo, Stephen Coty, Chief Security Evangelist at Alert Logic, will show how properly configured and managed security architecture can...
May. 6, 2016 08:45 AM EDT Reads: 671
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
May. 6, 2016 07:00 AM EDT Reads: 1,084
Artificial Intelligence has the potential to massively disrupt IoT. In his session at 18th Cloud Expo, AJ Abdallat, CEO of Beyond AI, will discuss what the five main drivers are in Artificial Intelligence that could shape the future of the Internet of Things. AJ Abdallat is CEO of Beyond AI. He has over 20 years of management experience in the fields of artificial intelligence, sensors, instruments, devices and software for telecommunications, life sciences, environmental monitoring, process...
May. 6, 2016 06:00 AM EDT Reads: 1,531
In his session at @ThingsExpo, Chris Klein, CEO and Co-founder of Rachio, will discuss next generation communities that are using IoT to create more sustainable, intelligent communities. One example is Sterling Ranch, a 10,000 home development that – with the help of Siemens – will integrate IoT technology into the community to provide residents with energy and water savings as well as intelligent security. Everything from stop lights to sprinkler systems to building infrastructures will run ef...
May. 6, 2016 04:00 AM EDT Reads: 1,348
We’ve worked with dozens of early adopters across numerous industries and will debunk common misperceptions, which starts with understanding that many of the connected products we’ll use over the next 5 years are already products, they’re just not yet connected. With an IoT product, time-in-market provides much more essential feedback than ever before. Innovation comes from what you do with the data that the connected product provides in order to enhance the customer experience and optimize busi...
May. 6, 2016 02:00 AM EDT Reads: 1,442
Manufacturers are embracing the Industrial Internet the same way consumers are leveraging Fitbits – to improve overall health and wellness. Both can provide consistent measurement, visibility, and suggest performance improvements customized to help reach goals. Fitbit users can view real-time data and make adjustments to increase their activity. In his session at @ThingsExpo, Mark Bernardo Professional Services Leader, Americas, at GE Digital, will discuss how leveraging the Industrial Interne...
May. 6, 2016 01:45 AM EDT Reads: 1,452
The increasing popularity of the Internet of Things necessitates that our physical and cognitive relationship with wearable technology will change rapidly in the near future. This advent means logging has become a thing of the past. Before, it was on us to track our own data, but now that data is automatically available. What does this mean for mHealth and the "connected" body? In her session at @ThingsExpo, Lisa Calkins, CEO and co-founder of Amadeus Consulting, will discuss the impact of wea...
May. 6, 2016 01:00 AM EDT Reads: 1,279
Increasing IoT connectivity is forcing enterprises to find elegant solutions to organize and visualize all incoming data from these connected devices with re-configurable dashboard widgets to effectively allow rapid decision-making for everything from immediate actions in tactical situations to strategic analysis and reporting. In his session at 18th Cloud Expo, Shikhir Singh, Senior Developer Relations Manager at Sencha, will discuss how to create HTML5 dashboards that interact with IoT devic...
May. 6, 2016 12:00 AM EDT Reads: 1,499
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
May. 5, 2016 11:30 PM EDT Reads: 1,392
A critical component of any IoT project is the back-end systems that capture data from remote IoT devices and structure it in a way to answer useful questions. Traditional data warehouse and analytical systems are mature technologies that can be used to handle large data sets, but they are not well suited to many IoT-scale products and the need for real-time insights. At Fuze, we have developed a backend platform as part of our mobility-oriented cloud service that uses Big Data-based approache...
May. 5, 2016 04:00 PM EDT Reads: 811
There is an ever-growing explosion of new devices that are connected to the Internet using “cloud” solutions. This rapid growth is creating a massive new demand for efficient access to data. And it’s not just about connecting to that data anymore. This new demand is bringing new issues and challenges and it is important for companies to scale for the coming growth. And with that scaling comes the need for greater security, gathering and data analysis, storage, connectivity and, of course, the...
May. 5, 2016 12:30 PM EDT Reads: 1,359
The IETF draft standard for M2M certificates is a security solution specifically designed for the demanding needs of IoT/M2M applications. In his session at @ThingsExpo, Brian Romansky, VP of Strategic Technology at TrustPoint Innovation, will explain how M2M certificates can efficiently enable confidentiality, integrity, and authenticity on highly constrained devices.
May. 5, 2016 12:30 PM EDT Reads: 1,383