Click here to close now.



Welcome!

Agile Computing Authors: Elizabeth White, Liz McMillan, Xenia von Wedel, Sanjay Zalavadia, Dana Gardner

News Feed Item

Mitsubishi Electric Introduces LaserVue Projectors That Let You Wave "Goodbye" to Lamp Replacements

ORLANDO, FL -- (Marketwire) -- 01/29/13 -- Mitsubishi Electric's new LaserVue® family of lamp-free, environmentally-conscious portable projectors create brilliant images with accurate colors using a technologically advanced light engine unlike any other hybrid projector on the market today. Eco-conscious teachers and presenters will see Mitsubishi's first new hybrid projector at FETC (Florida Education Technology Conference) at the Orlando Convention Center this week in Booth #1113.

As a leading supplier of the world's laser light engines for display devices, Mitsubishi draws on its expertise to design and build this new line of lamp-free projectors. To produce the red-green-blue lighting elements required to form all display colors, Mitsubishi LaserVue projectors use one pure red LED and up to 34 pure blue laser diodes of varying strengths and wavelengths, and a solid-colored phosphor wheel that emits green light.

Unlike other light engine designs in the market today, some of the blue laser diodes are diverted to excite phosphors on this single-segment wheel. This creates a clean, clear green, eliminating color breaking or rainbow effects that are sometimes observed in similar projectors. Those that use dual or multi-segment color phosphor wheels often attempt to boost brightness at the expense of color accuracy. Mitsubishi's new design creates bright, truer blues and purer greens -- rich and accurate colors -- using a single-segment wheel.

Mitsubishi's new line of LaserVue projectors consists of three portable models: the NW31U-EST WXGA (1280 x 800 resolution) extreme short throw model will be the first to become available in April, followed shortly by two standard throw models: the NW30U WXGA (1280 x 800 resolution) and the NF32U full high-definition, 1080p resolution projector. They burst with 2500 lumens, 3000 lumens and 3000 lumens respectively. Each of these new LaserVue projectors have a light source estimated to last up to 20,000 hours of performance in standard mode, so teachers and presenters can expect many hours of use with no worries about changing lamps.

With this lamp-free design, schools districts, universities and even businesses can expect to save time and money over the life of the projector. And in a continued nod to cost savings, a high-power 10-watt speaker with variable audio output, and a built-in audio pass through means that even when the projector is in stand-by mode, the speaker can still be used. This eliminates the cost and necessity of external amplifiers and speakers.

These Mitsubishi LaserVue projectors also give presenters access to their content in new and different ways -- from mobile devices, the cloud, the internet, a networked server and a traditional computer source. With its built-in "thin client" technology, the Mitsubishi LaserVue projectors don't even need a computer. When connected to a networked server, they become dynamic display devices where users can simply log onto their network directly from the projector, gain access to content from the server and begin displaying it in seconds. Users can opt to skip the traditional steps of physically connecting their computer to the projector or manage any necessary projection function keys.

"Our LaserVue projectors lead the trend in using new technologies," said Wayne Kozuki, product manager, Mitsubishi Electric Visual Solutions America, Inc. "With a lamp-free design and direct access to the cloud, we hope to change the way people present in the classroom and the boardroom."

By using free SidePad and WiFi-Doc applications, these LaserVue projectors also support BYOD (Bring Your Own Display) initiatives with flexibility: teachers and presenters can use a mobile device such as a tablet or a smart phone to access, mirror and control a computer that is connected to the projector and the same Wi-Fi network, and present Powerpoint®, Excel®, Word®, TXT, PPD and JPG files from their iOS or Android devices directly through the projector. For the first time, presenters are untethered from their computers and can control and present from any location within the classroom or meeting space. Both the SidePad and Wifi-Doc apps are free downloads via the Apple® App store or Google Play™.

Long committed to social responsibility and conserving natural resources, Mitsubishi Electric has improved the design and production of its new projectors with the environment in mind, and can help buildings gain LEED certification:

  • Mitsubishi uses lead-free solder on all printed circuit boards.
  • New models are designed with high-efficiency standby modes that are designed to use less than one watt of power.
  • Full-volume user manuals have been eliminated from production and information has been converted into CD or web downloadable format for easy storage and less material consumption.
  • Mitsubishi Electric projector cabinets are not painted, and no conductive coating is used.

"There's a new world in the classroom and boardroom, and Mitsubishi is here to display it, brilliantly, accurately, and cost-effectively," said James Chan, vice president of marketing, Mitsubishi Electric Visual Display Solutions.

The NW31U-EST and NW30U are targeted for availability in April and the NF32U is targeted for availability in June, with pricing released at that time. Each LaserVue projector comes with a three year warranty on parts and labor, and five years or 10,000 hours on the light source, whichever comes first. A projector and associated light source is covered for three years by Mitsubishi's Express Replacement Assistance (ERA) Program, a comprehensive nationwide service that offers next business-day replacement* for units that are under warranty. Terms and conditions apply.

About Mitsubishi Electric Visual Solutions America, Inc.
Headquartered in Irvine, Calif., Mitsubishi Electric Visual Solutions America, Inc. is a US subsidiary of Mitsubishi Electric Corporation of Tokyo, Japan. Mitsubishi Electric Visual Solutions America manufactures and markets projectors, data wall display systems, LCD digital signage monitors and players, industrial printers, photo kiosks and digital photo printers.

For more on Mitsubishi Electric Visual Solutions America, visit http://www.mevsa.com. Connect with Mitsubishi on Facebook (http://www.facebook.com/MitsubishiDisplays) and Twitter (http://twitter.com/MitsuDisplays).

Laservue is a registered trademark of Mitsubishi Electric. Other names are trademarks of their respective owners.

*where available via FedEx

Add to Digg Bookmark with del.icio.us Add to Newsvine

Contact:
Nancy Napurski
Lionheart Communications
585-967-3348
Email Contact

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

@ThingsExpo Stories
The cloud promises new levels of agility and cost-savings for Big Data, data warehousing and analytics. But it’s challenging to understand all the options – from IaaS and PaaS to newer services like HaaS (Hadoop as a Service) and BDaaS (Big Data as a Service). In her session at @BigDataExpo at @ThingsExpo, Hannah Smalltree, a director at Cazena, provided an educational overview of emerging “as-a-service” options for Big Data in the cloud. This is critical background for IT and data profession...
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
Cloud Expo, Inc. has announced today that Andi Mann returns to 'DevOps at Cloud Expo 2016' as Conference Chair The @DevOpsSummit at Cloud Expo will take place on November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. "DevOps is set to be one of the most profound disruptions to hit IT in decades," said Andi Mann. "It is a natural extension of cloud computing, and I have seen both firsthand and in independent research the fantastic results DevOps delivers. So I am excited t...
In addition to all the benefits, IoT is also bringing new kind of customer experience challenges - cars that unlock themselves, thermostats turning houses into saunas and baby video monitors broadcasting over the internet. This list can only increase because while IoT services should be intuitive and simple to use, the delivery ecosystem is a myriad of potential problems as IoT explodes complexity. So finding a performance issue is like finding the proverbial needle in the haystack.
Apixio Inc. has raised $19.3 million in Series D venture capital funding led by SSM Partners with participation from First Analysis, Bain Capital Ventures and Apixio’s largest angel investor. Apixio will dedicate the proceeds toward advancing and scaling products powered by its cognitive computing platform, further enabling insights for optimal patient care. The Series D funding comes as Apixio experiences strong momentum and increasing demand for its HCC Profiler solution, which mines unstruc...
The Internet of Things will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform and how we integrate our thinking to solve complicated problems. In his session at 19th Cloud Expo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm ...
Internet of @ThingsExpo has announced today that Chris Matthieu has been named tech chair of Internet of @ThingsExpo 2016 Silicon Valley. The 6thInternet of @ThingsExpo will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
The cloud market growth today is largely in public clouds. While there is a lot of spend in IT departments in virtualization, these aren’t yet translating into a true “cloud” experience within the enterprise. What is stopping the growth of the “private cloud” market? In his general session at 18th Cloud Expo, Nara Rajagopalan, CEO of Accelerite, explored the challenges in deploying, managing, and getting adoption for a private cloud within an enterprise. What are the key differences between wh...
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2016 Silicon Valley. The 19th Cloud Expo and 6th @ThingsExpo will take place on November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Interne...
"We work in the area of Big Data analytics and Big Data analytics is a very crowded space - you have Hadoop, ETL, warehousing, visualization and there's a lot of effort trying to get these tools to talk to each other," explained Mukund Deshpande, head of the Analytics practice at Accelerite, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
The idea of comparing data in motion (at the sensor level) to data at rest (in a Big Data server warehouse) with predictive analytics in the cloud is very appealing to the industrial IoT sector. The problem Big Data vendors have, however, is access to that data in motion at the sensor location. In his session at @ThingsExpo, Scott Allen, CMO of FreeWave, discussed how as IoT is increasingly adopted by industrial markets, there is going to be an increased demand for sensor data from the outermos...
UAS, drones or unmanned aircraft, no matter what you call them — this was their week. Our news stream was flooded with updates on the newly announced rules and regulations for commercial UAS from the FAA. So, naturally we have dedicated this week’s top news round up to highlight some of our favorite UAS stories.
CenturyLink has announced that application server solutions from GENBAND are now available as part of CenturyLink’s Networx contracts. The General Services Administration (GSA)’s Networx program includes the largest telecommunications contract vehicles ever awarded by the federal government. CenturyLink recently secured an extension through spring 2020 of its offerings available to federal government agencies via GSA’s Networx Universal and Enterprise contracts. GENBAND’s EXPERiUS™ Application...
Basho Technologies has announced the latest release of Basho Riak TS, version 1.3. Riak TS is an enterprise-grade NoSQL database optimized for Internet of Things (IoT). The open source version enables developers to download the software for free and use it in production as well as make contributions to the code and develop applications around Riak TS. Enhancements to Riak TS make it quick, easy and cost-effective to spin up an instance to test new ideas and build IoT applications. In addition to...
When people aren’t talking about VMs and containers, they’re talking about serverless architecture. Serverless is about no maintenance. It means you are not worried about low-level infrastructural and operational details. An event-driven serverless platform is a great use case for IoT. In his session at @ThingsExpo, Animesh Singh, an STSM and Lead for IBM Cloud Platform and Infrastructure, will detail how to build a distributed serverless, polyglot, microservices framework using open source tec...
Presidio has received the 2015 EMC Partner Services Quality Award from EMC Corporation for achieving outstanding service excellence and customer satisfaction as measured by the EMC Partner Services Quality (PSQ) program. Presidio was also honored as the 2015 EMC Americas Marketing Excellence Partner of the Year and 2015 Mid-Market East Partner of the Year. The EMC PSQ program is a project-specific survey program designed for partners with Service Partner designations to solicit customer feedbac...
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
In his general session at 18th Cloud Expo, Lee Atchison, Principal Cloud Architect and Advocate at New Relic, discussed cloud as a ‘better data center’ and how it adds new capacity (faster) and improves application availability (redundancy). The cloud is a ‘Dynamic Tool for Dynamic Apps’ and resource allocation is an integral part of your application architecture, so use only the resources you need and allocate /de-allocate resources on the fly.