|By Don MacVittie||
|December 14, 2012 10:00 AM EST||
Along the lines of the first blog in the testing portion of the Bare Metal Blog series, I’d like to talk a bit more about how the testing environment, the device configuration, and the payloads translate into test results.
One of the problems most advanced mass education systems run into is the question of standardized testing. While it is true that you cannot fix what you have not determined is broken, like most things involving people, testing students for specific areas of knowledge does kind of guarantee that those doing the teaching will err on the side of preparing students to take the test rather than to succeed in life. The mere fact that there IS a test changes what is taught. It is of course possible to a make this into a massively positive proposition by targeting the standardized tests at the most important things students need to learn, but for our discussion purposes, the result is the same – the students will be taught to whatever is on that test first, and all else secondarily.
This is far too often true of vendor product testing also. The mere fact that there will be a test of the equipment, and most high-tech markets being highly competitive, makes things lean toward tweaking the device (or the test) to maximize test performance, in spite of what the real world performance will be.
The current most flagrant problem with testing is a variant on an old theme. Way back when testing the throughput of network switches made sense, there was a lot of “packets per second” testing with no payload. Well, you test the ability of the switch to send packets to the right place, but do not at all test the device in a manner consistent with the real world usage of switches. Today we have a whole slew of similar tests for ADCs. The purpose of an ADC is to load balance, optimize, and if needed secure the passage of packets. Primarily this is for application traffic because they’re Application Delivery Controllers. Yet, application traffic being layer seven kind of means that you need to do some layer seven decision-making if the device is to be tested in the real world. If the packet is a layer seven packet, but layer four switching is all that is performed on it, the test is completely useless to determining the actual capabilities of the device. And yet there is a lot of that type of testing going on out there right now. It’s time – way past time – to drive testing into the real world for ADCs. Layer seven decision making is much more complex and requires a deep look at the packets in question, meaning that the results will not be nearly as pretty as simple layer four switching packets are. While you cannot do a direct comparison of all of the optional features of two different ADCs simply because the level of optional functionality support is so broad once a solid ADC platform is deployed, but you can test the basic capabilities and responsiveness of the core products.
And that is what we, as an industry must begin to insist on. I use one single oddity in ADC testing here, but every branch of high-tech testing I’ve been involved in over the years – security, network gear, storage, application – all have similar “this is not good enough” testing that we need to demand is dropped in favor of solid testing that reflects a real-world device. Not your real-world device unless you are running the test lab, but a real-world device that is seeing – and more importantly acting upon – data that the device will encounter in an actual network, doing the job it was designed for.
As I mentioned in the last testing installment, you can make an ADC look astounding if your tests don’t actually force it to do anything. For our public testing, we have standards, and offer up our configuration and testing goals on DevCentral. Whether you use it to validate the test results F5 uses, or to set up the tests in your own environment, publicly talking about how testing is performed is a big deal. Ask your vendor for configuration files and testing plan when numbers are tossed at you, make certain you know what they’re testing when they try to impress you with over-the-top performance numbers. In my career, I have seen cases where “double the performance of our nearest competitor” was used publicly and was as close to an outright lie as possible, since the test and configuration were different between the two products the test claimed to compare.
When you buy any form of datacenter equipment, you’re going to be stuck with it for a good long while. Make certain you know how testing that is informing your decision was performed, no matter who did the testing. Independent third party testing sometimes isn’t so independent, and knowing that can make you more cautious when hooking your company with gear you’ll have to live with.
Bare Metal Blog Series:
WebRTC has had a real tough three or four years, and so have those working with it. Only a few short years ago, the development world were excited about WebRTC and proclaiming how awesome it was. You might have played with the technology a couple of years ago, only to find the extra infrastructure requirements were painful to implement and poorly documented. This probably left a bitter taste in your mouth, especially when things went wrong.
Oct. 10, 2015 06:00 AM EDT Reads: 806
Nowadays, a large number of sensors and devices are connected to the network. Leading-edge IoT technologies integrate various types of sensor data to create a new value for several business decision scenarios. The transparent cloud is a model of a new IoT emergence service platform. Many service providers store and access various types of sensor data in order to create and find out new business values by integrating such data.
Oct. 10, 2015 04:00 AM EDT Reads: 599
The broad selection of hardware, the rapid evolution of operating systems and the time-to-market for mobile apps has been so rapid that new challenges for developers and engineers arise every day. Security, testing, hosting, and other metrics have to be considered through the process. In his session at Big Data Expo, Walter Maguire, Chief Field Technologist, HP Big Data Group, at Hewlett-Packard, will discuss the challenges faced by developers and a composite Big Data applications builder, focusing on how to help solve the problems that developers are continuously battling.
Oct. 10, 2015 04:00 AM EDT Reads: 517
There are so many tools and techniques for data analytics that even for a data scientist the choices, possible systems, and even the types of data can be daunting. In his session at @ThingsExpo, Chris Harrold, Global CTO for Big Data Solutions for EMC Corporation, will show how to perform a simple, but meaningful analysis of social sentiment data using freely available tools that take only minutes to download and install. Participants will get the download information, scripts, and complete end-to-end walkthrough of the analysis from start to finish. Participants will also be given the pract...
Oct. 10, 2015 03:00 AM EDT Reads: 331
WebRTC: together these advances have created a perfect storm of technologies that are disrupting and transforming classic communications models and ecosystems. In his session at WebRTC Summit, Cary Bran, VP of Innovation and New Ventures at Plantronics and PLT Labs, will provide an overview of this technological shift, including associated business and consumer communications impacts, and opportunities it may enable, complement or entirely transform.
Oct. 10, 2015 02:15 AM EDT Reads: 772
SYS-CON Events announced today that Dyn, the worldwide leader in Internet Performance, will exhibit at SYS-CON's 17th International Cloud Expo®, which will take place on November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA. Dyn is a cloud-based Internet Performance company. Dyn helps companies monitor, control, and optimize online infrastructure for an exceptional end-user experience. Through a world-class network and unrivaled, objective intelligence into Internet conditions, Dyn ensures traffic gets delivered faster, safer, and more reliably than ever.
Oct. 10, 2015 02:00 AM EDT Reads: 657
WebRTC services have already permeated corporate communications in the form of videoconferencing solutions. However, WebRTC has the potential of going beyond and catalyzing a new class of services providing more than calls with capabilities such as mass-scale real-time media broadcasting, enriched and augmented video, person-to-machine and machine-to-machine communications. In his session at @ThingsExpo, Luis Lopez, CEO of Kurento, will introduce the technologies required for implementing these ideas and some early experiments performed in the Kurento open source software community in areas ...
Oct. 10, 2015 01:00 AM EDT Reads: 783
Too often with compelling new technologies market participants become overly enamored with that attractiveness of the technology and neglect underlying business drivers. This tendency, what some call the “newest shiny object syndrome,” is understandable given that virtually all of us are heavily engaged in technology. But it is also mistaken. Without concrete business cases driving its deployment, IoT, like many other technologies before it, will fade into obscurity.
Oct. 10, 2015 12:00 AM EDT Reads: 183
Today air travel is a minefield of delays, hassles and customer disappointment. Airlines struggle to revitalize the experience. GE and M2Mi will demonstrate practical examples of how IoT solutions are helping airlines bring back personalization, reduce trip time and improve reliability. In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect with GE, and Dr. Sarah Cooper, M2Mi's VP Business Development and Engineering, will explore the IoT cloud-based platform technologies driving this change including privacy controls, data transparency and integration of real time context w...
Oct. 9, 2015 10:15 PM EDT Reads: 151
Who are you? How do you introduce yourself? Do you use a name, or do you greet a friend by the last four digits of his social security number? Assuming you don’t, why are we content to associate our identity with 10 random digits assigned by our phone company? Identity is an issue that affects everyone, but as individuals we don’t spend a lot of time thinking about it. In his session at @ThingsExpo, Ben Klang, Founder & President of Mojo Lingo, will discuss the impact of technology on identity. Should we federate, or not? How should identity be secured? Who owns the identity? How is identity ...
Oct. 9, 2015 10:00 PM EDT Reads: 454
The IoT market is on track to hit $7.1 trillion in 2020. The reality is that only a handful of companies are ready for this massive demand. There are a lot of barriers, paint points, traps, and hidden roadblocks. How can we deal with these issues and challenges? The paradigm has changed. Old-style ad-hoc trial-and-error ways will certainly lead you to the dead end. What is mandatory is an overarching and adaptive approach to effectively handle the rapid changes and exponential growth.
Oct. 9, 2015 10:00 PM EDT Reads: 250
The buzz continues for cloud, data analytics and the Internet of Things (IoT) and their collective impact across all industries. But a new conversation is emerging - how do companies use industry disruption and technology enablers to lead in markets undergoing change, uncertainty and ambiguity? Organizations of all sizes need to evolve and transform, often under massive pressure, as industry lines blur and merge and traditional business models are assaulted and turned upside down. In this new data-driven world, marketplaces reign supreme while interoperability, APIs and applications deliver un...
Oct. 9, 2015 08:00 PM EDT Reads: 321
Electric power utilities face relentless pressure on their financial performance, and reducing distribution grid losses is one of the last untapped opportunities to meet their business goals. Combining IoT-enabled sensors and cloud-based data analytics, utilities now are able to find, quantify and reduce losses faster – and with a smaller IT footprint. Solutions exist using Internet-enabled sensors deployed temporarily at strategic locations within the distribution grid to measure actual line loads.
Oct. 9, 2015 06:30 PM EDT Reads: 148
The Internet of Everything is re-shaping technology trends–moving away from “request/response” architecture to an “always-on” Streaming Web where data is in constant motion and secure, reliable communication is an absolute necessity. As more and more THINGS go online, the challenges that developers will need to address will only increase exponentially. In his session at @ThingsExpo, Todd Greene, Founder & CEO of PubNub, will explore the current state of IoT connectivity and review key trends and technology requirements that will drive the Internet of Things from hype to reality.
Oct. 9, 2015 05:30 PM EDT Reads: 126
The Internet of Things (IoT) is growing rapidly by extending current technologies, products and networks. By 2020, Cisco estimates there will be 50 billion connected devices. Gartner has forecast revenues of over $300 billion, just to IoT suppliers. Now is the time to figure out how you’ll make money – not just create innovative products. With hundreds of new products and companies jumping into the IoT fray every month, there’s no shortage of innovation. Despite this, McKinsey/VisionMobile data shows "less than 10 percent of IoT developers are making enough to support a reasonably sized team....
Oct. 9, 2015 04:00 PM EDT Reads: 254
You have your devices and your data, but what about the rest of your Internet of Things story? Two popular classes of technologies that nicely handle the Big Data analytics for Internet of Things are Apache Hadoop and NoSQL. Hadoop is designed for parallelizing analytical work across many servers and is ideal for the massive data volumes you create with IoT devices. NoSQL databases such as Apache HBase are ideal for storing and retrieving IoT data as “time series data.”
Oct. 9, 2015 03:45 PM EDT Reads: 512
Today’s connected world is moving from devices towards things, what this means is that by using increasingly low cost sensors embedded in devices we can create many new use cases. These span across use cases in cities, vehicles, home, offices, factories, retail environments, worksites, health, logistics, and health. These use cases rely on ubiquitous connectivity and generate massive amounts of data at scale. These technologies enable new business opportunities, ways to optimize and automate, along with new ways to engage with users.
Oct. 9, 2015 02:00 PM EDT Reads: 194
The IoT is upon us, but today’s databases, built on 30-year-old math, require multiple platforms to create a single solution. Data demands of the IoT require Big Data systems that can handle ingest, transactions and analytics concurrently adapting to varied situations as they occur, with speed at scale. In his session at @ThingsExpo, Chad Jones, chief strategy officer at Deep Information Sciences, will look differently at IoT data so enterprises can fully leverage their IoT potential. He’ll share tips on how to speed up business initiatives, harness Big Data and remain one step ahead by apply...
Oct. 9, 2015 01:45 PM EDT Reads: 567
There will be 20 billion IoT devices connected to the Internet soon. What if we could control these devices with our voice, mind, or gestures? What if we could teach these devices how to talk to each other? What if these devices could learn how to interact with us (and each other) to make our lives better? What if Jarvis was real? How can I gain these super powers? In his session at 17th Cloud Expo, Chris Matthieu, co-founder and CTO of Octoblu, will show you!
Oct. 9, 2015 01:15 PM EDT
As a company adopts a DevOps approach to software development, what are key things that both the Dev and Ops side of the business must keep in mind to ensure effective continuous delivery? In his session at DevOps Summit, Mark Hydar, Head of DevOps, Ericsson TV Platforms, will share best practices and provide helpful tips for Ops teams to adopt an open line of communication with the development side of the house to ensure success between the two sides.
Oct. 9, 2015 01:00 PM EDT Reads: 626