|By Richard Spragg||
|November 16, 2012 12:00 PM EST||
It was only fairly recently that I cracked the myth of multitasking, and found an attitude toward it that I am comfortable with.
These days, I see it this way. A housewife (if you'll forgive the 1950s stereotype that follows - but the idea of the multitasking superwoman is perfect for this purpose) needs to cook dinner, tidy up the lounge of toys and change a nappy. She leaves some sauce simmering on the stove, picks up a couple of soft toys and throws them in the toy chest, then takes care of the baby's nappy. She returns child to crib, washes her hands, picks up the books that were on the floor and slides them back into the bookshelf. She returns to the stove, adds some basil, reduces the heat and goes to answer the doorbell. This is the classic stereotype of multitasking. That skill, much maligned by the stereotype useless male - unable to sit upright and breath in and out at the same time - that results in incredible productivity.
But this is not really multitasking.
At no stage was the housewife engaged in two tasks at once, nor should she have been. True multitasking would have involved changing the nappy, while using the baby's legs to stir the sauce and kicking the toys and books one by one toward the place they were supposed to go. The result? Burned feet, nappies on the stove, books nowhere near the bookshelf and a lot of mess to clean up.
Thus stands the multitasking myth. Because what you're really talking about is not the ability to complete multiple tasks at once, but the ability to switch between tasks effectively, without hindering the effectiveness of your contribution to any of them. This is what you should focus on improving if you want to be a multitasker. How can you flip between jobs productively? Your working routine is bound to require it; nobody's working day ever allows them to focus on one thing only, but they are seldom required to actually do two things at once.
So multitasking remains one of the biggest myths in the modern workplace, whether that work place is an office, a construction site or a household.
That's not to say it doesn't exist, or that it can't be done. There are number of ways that you can multitask effectively, and putting some thought into structuring your day to allow for these real examples of multitasking is what will help to make you more efficient.
Here are a few things you can do that constitute real multitasking.
Schedule phone conversations when you're driving (hands free please.)
My car has some clever green tooth or blue eye thing that means I receive calls from a button on my steering wheel. But a $10 earpiece has much the same effect.If you have an hour long commute involving traffic (and if you're working on engineering jobs in Houston for example, I know you do) you can make it work for you. It doesn't have to be business; it can be anything that will save you time earlier or later in the day. Sit on hold with whichever bank is currently abusing your custom. Call Mom. If it's something you would have to find other time to do otherwise, it's saving you time. (Make sure you are complying with all legal responsibilities for safety reasons.)
Combine Audiobooks with basic physical tasks
Again, the car is good. But so is the bath, the kitchen while you're cooking dinner (one of my responsibilities at our place - who's 1950's now?) or the treadmill at the gym. You don't have to read, to get that book read. It was a big day for me when I realized that iPods weren't just for music. Audiobooks (that you pay for) or podcasts (that you don't) offer a vast range of opportunities to learn and develop during dead time, like when you're on the stationary bike, or boiling the water for the pasta.
Combine Conference Calls with almost anything
Be honest. A good number of conference calls require less than active participation. If I find myself on one of those calls, I look for the mute button and for something else to do. If I'm in my office at home, I'll do a wash load or clean the kitchen. The combination of mindless physical task and passive mental task is a good one. You should be careful not to try anything too engaging. It's difficult to build a PowerPoint presentation or write a detailed e-mail and stay on top of the subject matter of a conference call, even if you're not talking very often. You need to pay attention, but a physical task that requires no thought should allow that.
Multitasking can only be effectively achieved with the right balance of mindless physical tasks and stationary mental ones. As soon as anything blurs the lines on that distinction, you're in trouble. Beware overreaching. I suggest you take my word for the fact that stationary bikes and food preparation are not a good match. Weddings and audiobooks can also result in injuries of a different kind. Throughout this process, one must pay attention to what is potentially dangerous, or just plain inappropriate. It's easy to offend people if they should get the impression they don't have your full attention.
At the end of the day, which task you are neglecting, and which you are diligently carrying out is all a matter of perception. As my school chaplain once told me - "You can't smoke while you pray. But you can pray, while you smoke."
Multitasking suggestions and party fouls welcome in your comments...
We’re entering a new era of computing technology that many are calling the Internet of Things (IoT). Machine to machine, machine to infrastructure, machine to environment, the Internet of Everything, the Internet of Intelligent Things, intelligent systems – call it what you want, but it’s happening, and its potential is huge. IoT is comprised of smart machines interacting and communicating with other machines, objects, environments and infrastructures. As a result, huge volumes of data are being generated, and that data is being processed into useful actions that can “command and control” thi...
May. 27, 2015 11:51 AM EDT
SYS-CON Events announced today that BMC will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. BMC delivers software solutions that help IT transform digital enterprises for the ultimate competitive business advantage. BMC has worked with thousands of leading companies to create and deliver powerful IT management services. From mainframe to cloud to mobile, BMC pairs high-speed digital innovation with robust IT industrialization – allowing customers to provide amazing user experiences with optimized IT per...
May. 27, 2015 11:30 AM EDT Reads: 495
As the Internet of Things unfolds, mobile and wearable devices are blurring the line between physical and digital, integrating ever more closely with our interests, our routines, our daily lives. Contextual computing and smart, sensor-equipped spaces bring the potential to walk through a world that recognizes us and responds accordingly. We become continuous transmitters and receivers of data. In his session at @ThingsExpo, Andrew Bolwell, Director of Innovation for HP's Printing and Personal Systems Group, discussed how key attributes of mobile technology – touch input, sensors, social, and ...
May. 27, 2015 11:30 AM EDT Reads: 4,273
All major researchers estimate there will be tens of billions devices - computers, smartphones, tablets, and sensors - connected to the Internet by 2020. This number will continue to grow at a rapid pace for the next several decades. With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo, June 9-11, 2015, at the Javits Center in New York City. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be
May. 27, 2015 11:15 AM EDT Reads: 2,773
The Internet of Things is not only adding billions of sensors and billions of terabytes to the Internet. It is also forcing a fundamental change in the way we envision Information Technology. For the first time, more data is being created by devices at the edge of the Internet rather than from centralized systems. What does this mean for today's IT professional? In this Power Panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists will addresses this very serious issue of profound change in the industry.
May. 27, 2015 10:30 AM EDT Reads: 1,306
WebRTC defines no default signaling protocol, causing fragmentation between WebRTC silos. SIP and XMPP provide possibilities, but come with considerable complexity and are not designed for use in a web environment. In his session at @ThingsExpo, Matthew Hodgson, technical co-founder of the Matrix.org, discussed how Matrix is a new non-profit Open Source Project that defines both a new HTTP-based standard for VoIP & IM signaling and provides reference implementations.
May. 27, 2015 10:30 AM EDT Reads: 5,474
Buzzword alert: Microservices and IoT at a DevOps conference? What could possibly go wrong? In this Power Panel at DevOps Summit, moderated by Jason Bloomberg, the leading expert on architecting agility for the enterprise and president of Intellyx, panelists will peel away the buzz and discuss the important architectural principles behind implementing IoT solutions for the enterprise. As remote IoT devices and sensors become increasingly intelligent, they become part of our distributed cloud environment, and we must architect and code accordingly. At the very least, you'll have no problem fil...
May. 27, 2015 10:00 AM EDT Reads: 2,244
"People are a lot more knowledgeable about APIs now. There are two types of people who work with APIs - IT people who want to use APIs for something internal and the product managers who want to do something outside APIs for people to connect to them," explained Roberto Medrano, Executive Vice President at SOA Software, in this SYS-CON.tv interview at Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
May. 27, 2015 09:30 AM EDT Reads: 4,622
Almost everyone sees the potential of Internet of Things but how can businesses truly unlock that potential. The key will be in the ability to discover business insight in the midst of an ocean of Big Data generated from billions of embedded devices via Systems of Discover. Businesses will also need to ensure that they can sustain that insight by leveraging the cloud for global reach, scale and elasticity.
May. 27, 2015 09:30 AM EDT Reads: 7,125
In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect at GE, and Ibrahim Gokcen, who leads GE's advanced IoT analytics, focused on the Internet of Things / Industrial Internet and how to make it operational for business end-users. Learn about the challenges posed by machine and sensor data and how to marry it with enterprise data. They also discussed the tips and tricks to provide the Industrial Internet as an end-user consumable service using Big Data Analytics and Industrial Cloud.
May. 27, 2015 07:30 AM EDT Reads: 5,732
Building low-cost wearable devices can enhance the quality of our lives. In his session at Internet of @ThingsExpo, Sai Yamanoor, Embedded Software Engineer at Altschool, provided an example of putting together a small keychain within a $50 budget that educates the user about the air quality in their surroundings. He also provided examples such as building a wearable device that provides transit or recreational information. He then reviewed the resources available to build wearable devices at home including open source hardware, the raw materials required and the options available to power s...
May. 27, 2015 04:30 AM EDT Reads: 4,329
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happens, where data lives and where the interface lies. For instance, it's a mix of architectural styles ...
May. 27, 2015 03:00 AM EDT Reads: 6,005
We certainly live in interesting technological times. And no more interesting than the current competing IoT standards for connectivity. Various standards bodies, approaches, and ecosystems are vying for mindshare and positioning for a competitive edge. It is clear that when the dust settles, we will have new protocols, evolved protocols, that will change the way we interact with devices and infrastructure. We will also have evolved web protocols, like HTTP/2, that will be changing the very core of our infrastructures. At the same time, we have old approaches made new again like micro-services...
May. 27, 2015 02:30 AM EDT Reads: 5,671
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective storage designed to handle the massive surge in back-end data in a world where timely analytics is e...
May. 27, 2015 02:00 AM EDT Reads: 6,417
Collecting data in the field and configuring multitudes of unique devices is a time-consuming, labor-intensive process that can stretch IT resources. Horan & Bird [H&B], Australia’s fifth-largest Solar Panel Installer, wanted to automate sensor data collection and monitoring from its solar panels and integrate the data with its business and marketing systems. After data was collected and structured, two major areas needed to be addressed: improving developer workflows and extending access to a business application to multiple users (multi-tenancy). Docker, a container technology, was used to ...
May. 27, 2015 01:00 AM EDT Reads: 2,625
The true value of the Internet of Things (IoT) lies not just in the data, but through the services that protect the data, perform the analysis and present findings in a usable way. With many IoT elements rooted in traditional IT components, Big Data and IoT isn’t just a play for enterprise. In fact, the IoT presents SMBs with the prospect of launching entirely new activities and exploring innovative areas. CompTIA research identifies several areas where IoT is expected to have the greatest impact.
May. 26, 2015 09:00 PM EDT Reads: 5,280
The Industrial Internet revolution is now underway, enabled by connected machines and billions of devices that communicate and collaborate. The massive amounts of Big Data requiring real-time analysis is flooding legacy IT systems and giving way to cloud environments that can handle the unpredictable workloads. Yet many barriers remain until we can fully realize the opportunities and benefits from the convergence of machines and devices with Big Data and the cloud, including interoperability, data security and privacy.
May. 26, 2015 05:00 PM EDT Reads: 5,012
The Internet of Things is tied together with a thin strand that is known as time. Coincidentally, at the core of nearly all data analytics is a timestamp. When working with time series data there are a few core principles that everyone should consider, especially across datasets where time is the common boundary. In his session at Internet of @ThingsExpo, Jim Scott, Director of Enterprise Strategy & Architecture at MapR Technologies, discussed single-value, geo-spatial, and log time series data. By focusing on enterprise applications and the data center, he will use OpenTSDB as an example t...
May. 26, 2015 02:00 PM EDT Reads: 6,750
Scott Jenson leads a project called The Physical Web within the Chrome team at Google. Project members are working to take the scalability and openness of the web and use it to talk to the exponentially exploding range of smart devices. Nearly every company today working on the IoT comes up with the same basic solution: use my server and you'll be fine. But if we really believe there will be trillions of these devices, that just can't scale. We need a system that is open a scalable and by using the URL as a basic building block, we open this up and get the same resilience that the web enjoys.
May. 26, 2015 01:00 PM EDT Reads: 7,361
We are reaching the end of the beginning with WebRTC, and real systems using this technology have begun to appear. One challenge that faces every WebRTC deployment (in some form or another) is identity management. For example, if you have an existing service – possibly built on a variety of different PaaS/SaaS offerings – and you want to add real-time communications you are faced with a challenge relating to user management, authentication, authorization, and validation. Service providers will want to use their existing identities, but these will have credentials already that are (hopefully) i...
May. 26, 2015 01:00 PM EDT Reads: 4,655